JK Engineering Works

Orifice Flanges

Orifice Flanges Manufacturer

Orifice flanges are made from a pair of pressure “Tappings” that are placed next to one other, usually on two sides. These flanges are used in industry along with orifice metres to measure the flow of either liquids or gases in the corresponding pipeline.

JK Engineering Works is recognized as one of the leading Industrial Carbon Steel Orifice Flanges Exporter in India. By using a flow nozzle that has been kept on the ASME B16.36 flange, orifice flanges are used to measure the flow of fluid that has been conveyed via a pipeline. Asme B16.36 orifice flanges can be found in classes #300 to #2500. Flanges for the Orifice Class #300 are available in weld neck end, slip-on, and threaded varieties. Only weld neck type ends are available for flanges with orifice classes exceeding 600.

Asme B16.36 Stainless Steel Orifice Flanges come in a variety of grades and sizes. ASME B16.36 orifice flanges are produced in various grades and sizes. Stainless Steel Orifice Flanges of ASME B16.36 are obtainable in a variety of standard materials and special materials such as A182 F316 Stainless Steel, A182 F22 2¼% Cr 1% Mo, A105 Carbon Steel, A182 F304 Stainless Steel, A350 LF2 Low Temp Carbon Steel and A182 F11 1% Cr ½% Mo.

The main distinctions between Stainless Steel Orifice Flanges and slide on or weld neck flanges are that ASME B16.36 Stainless Steel Orifice Flanges have additional machining, and another difference is that orifice flanges contain radial, tapped holes in the flange ring. This acts as the function of the metre connections and enables additional bolts to act as jack screws to enable the separation of flanges during orifice plate replacement or inspection.

Aperture metres and ANSI/ASME B16.36 Stainless Steel Orifice Flanges are used together to monitor the flow rates of gas, oil, and other liquids that have been conveyed in a pipeline. The standard orifice flange assembly consists of nuts, an orifice plate, bolts, plugs, gaskets, a few flanges, and jacking screws. The major flow element can be easily removed thanks to the jacking screws. Instead of utilising normal pipe flanges when installing a flow nozzle or orifice plate, orifice flanges of ASME B16.36 are employed.

Generally, orifice flanges are available in RTJ (Ring Type Joint) facings or as Raised Faces. The most used orifice flanges of ASME B16.36 are weld neck flanges and the most popularly used among these are Threaded Class 300, Slip On Class 300 and Welding Neck Classes 900, 300, 2500, 600, 400 and 1500. Orifice flanges of ASME B16.36 can be constructed from a variety of materials such as carbon steel, alloy, stainless steel and any other suitable material.

Orifice Flanges Specification

ASME B16.5 Orifice Flange Size Chart	1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Orifice Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Orifice Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Orifice Flange
Orifice Flange Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Orifice Flange
JIS	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Orifice Flange
UNI	6Bar 10Bar 16Bar 25Bar 40Bar Orifice Flange
EN	6Bar 10Bar 16Bar 25Bar 40Bar Orifice Flange
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Orifice Flange

Most common types of Orifice Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Production technique	Forged, Heat treated and machined
Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2″) to 200 NB (8″) Equal and Reducing Configurations
Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UItrasonic flaw detector, Magnetic particle detector
Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. Orifice Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 Orifice Flange The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Orifice Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Orifice Flanges Material

Prestige quality Industrial Carbon Steel Orifice Flanges Exporter in India offer these Carbon Steel Orifice Flanges in DIN, EN, BS, ISO, JIS or ANSI standard.

Carbon Steel Orifice Flange	ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Stainless Steel Orifice Flange	ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
Alloy Steel Orifice Flange	ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
Titanium Orifice Flange	ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 \| R50400/GR.2 \| R50550/GR.3 \| R50700/GR.4 \| GR.6 \|R52400/GR.7 \| R53400/GR.12 \| R56320/GR.9 \|R56400/GR.5
Copper Orifice Flange	T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Orifice Flange	ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Brass Orifice Flange	3602 / 2604 / H59 / H62 / etc.
Inconel Orifice Flange	ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 Orifice Flange
Hastelloy Orifice Flange	ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges
Monel Orifice Flange	ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Alloy 20 Orifice Flange	ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
Aluminium Orifice Flange	5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel Orifice Flange	ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
Duplex Orifice Flange	S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex Orifice Flange	S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy Orifice Flange	ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges
254 Smo Orifice Flange	ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Nimonic Orifice Flange	Nimonic 75, Nimonic 80A, Nimonic 90
Other Orifice Flange material	Tin bronze, Alumunum bronze, Lead bronze

Orifice Flanges Dimensions

Size in Inch	Size in mm	Outer Dia.	Flange Thick.	Hub OD	Weld Neck OD	Welding Neck Length	RF Dia.	RF Height	PCD	Orifice Hole dia	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	F	G	H	I
1	25	125	36.6	54	33.4	81	50.8	2	88.9	6.4	4	5/8	125	3/4	M16	4.5
1 1/2	40	155	36.6	70	48.3	84	73	2	114.3	6.4	4	3/4	135	7/8	M20	6.5
2	50	165	36.6	84	60.3	84	92.1	2	127	6.4	8	5/8	125	3/4	M16	7
2 1/2	65	190	36.6	100	73	87	104.8	2	149.2	6.4	8	3/4	135	7/8	M20	7.5
3	80	210	36.6	117	88.9	87	127	2	168.3	9.5	8	3/4	135	7/8	M20	9.4
4	100	255	36.6	146	114.3	90	157.2	2	200	12.7	8	3/4	135	7/8	M20	13.2
6	150	320	36.6	206	168.3	98	215.9	2	269.9	12.7	12	3/4	135	7/8	M20	14.6
8	200	380	39.7	260	219.1	110	269.9	2	330.2	12.7	12	7/8	145	1	M24	30
10	250	445	46.1	321	273	116	323.8	2	387.3	12.7	16	1	165	1 1/8	M27	41
12	300	520	49.3	375	323.8	129	381	2	450.8	12.7	16	1 1/8	180	1 1/4	M30	62
14	350	585	52.4	425	355.6	141	412.8	2	514.4	12.7	20	1 1/8	185	1 1/4	M30	84
16	400	650	55.6	483	406.4	144	469.9	2	571.5	12.7	20	1 1/4	195	1 3/8	M33	111
18	450	710	58.8	533	457	157	533.4	2	628.6	12.7	24	1 1/4	205	1 3/8	M33	138
20	500	775	62	587	508	160	584.2	2	685.8	12.7	24	1 1/4	215	1 3/8	M33	171
24	600	915	68.3	702	610	167	692.2	2	812.8	12.7	24	1 1/2	240	1 5/8	M39	247

Class 600 Orifice Flanges Dimensions

Size in Inch	Size in mm	Outer Dia.	Flange Thick.	Hub OD	Weld Neck OD	Welding Neck Length	RF Dia.	RF Height	PCD	Orifice Hole dia	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	F	G	H	I
1	25	125	36.6	54	33.5	81	50.8	7	88.9	6.4	4	5/8	125	3/4	M16	5.5
1 1/2	40	155	36.6	70	48.3	84	73	7	114.3	6.4	4	3/4	135	7/8	M20	7.8
2	50	165	36.6	84	60.3	84	92.1	7	127	6.4	8	5/8	125	3/4	M16	8.3
2 1/2	65	190	36.6	100	73	87	104.8	7	149.2	6.4	8	3/4	135	7/8	M20	10.8
3	80	210	36.6	117	88.9	87	127	7	168.3	9.5	8	3/4	135	7/8	M20	12.6
4	100	275	38.1	152	114.3	102	157.2	7	215.9	12.7	8	7/8	150	1	M24	19
6	150	355	47.7	222	168.3	117	215.9	7	292.1	12.7	12	1	180	1 1/8	M27	37
8	200	420	55.6	273	219.1	133	269.9	7	349.2	12.7	12	1 1/8	195	1 1/4	M30	53
10	250	510	63.5	343	273	152	323.8	7	431.8	12.7	16	1 1/4	220	1 3/8	M33	86
12	300	560	66.7	400	323.8	156	381	7	489	12.7	20	1 1/4	230	1 3/8	M33	102
14	350	605	69.9	432	355.6	165	412.8	7	527	12.7	20	1 3/8	240	1 1/2	M36	150
16	400	685	76.2	495	406.4	178	469.9	7	603.2	12.7	20	1 1/2	260	1 5/8	M39	190
18	450	745	82.6	546	457.2	184	533.4	7	654	12.7	20	1 5/8	280	1 3/4	M42	240
20	500	815	88.9	610	508	190	584.2	7	723.9	12.7	24	1 5/8	300	1 3/4	M42	295
24	600	940	101.6	718	609.6	203	692.2	7	838.2	12.7	24	1 7/8	335	2	M48	365

Class 900 Orifice Flanges Dimensions

Size in Inch	Size in mm	Outer Dia.	Flange Thick.	Hub OD	Weld Neck OD	Welding Neck Length	RF Dia.	RF Height	PCD	Orifice Hole dia	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	F	G	H	I
1	25	150	38.1	52	33.5	83	50.8	7	101.6	6.4	4	7/8	150	1	M24	5.4
1 1/2	40	180	38.1	70	48.3	89	73	7	123.8	6.4	4	1	160	1 1/8	M27	7.8
2	50	215	38.1	105	60.3	102	92.1	7	165.1	6.4	8	7/8	150	1	M30	11.5
2 1/2	65	245	41.3	124	73	105	104.8	7	190.5	6.4	8	1	165	1 1/8	M27	15.8
3	80	240	38.1	127	88.9	102	127	7	190.5	9.5	8	7/8	150	1	M24	22
4	100	290	44.5	159	114.3	114	157.2	7	235	12.7	8	1 1/8	180	1 1/4	M30	22
6	150	380	55.6	235	168.3	140	215.9	7	317.5	12.7	12	1 1/8	195	1 1/4	M30	70
8	200	470	63.5	298	219.1	162	269.9	7	393.7	12.7	12	1 3/8	230	1 1/2	M36	119
10	250	545	69.9	368	273	184	323.8	7	469.9	12.7	16	1 3/8	240	1 1/2	M36	204
12	300	610	79.4	419	323.8	200	381	7	533.4	12.7	20	1 3/8	260	1 1/2	M36	303
14	350	640	85.8	451	355.6	213	412.8	7	558.8	12.7	20	1 1/2	280	1 5/8	M39	400
16	400	705	88.9	508	406.4	216	469.9	7	616	12.7	20	1 5/8	290	1 3/4	M42	510
18	450	785	101.9	565	457.2	229	533.4	7	685.8	12.7	20	1 7/8	330	2	M48	738
20	500	855	108	622	508	248	584.2	7	749.3	12.7	20	2	355	2 1/8	M52	932
24	600	1040	139.7	749	609.6	292	692.2	7	901.7	12.7	20	2 1/2	445	2 5/8	M64	1511

Class 1500 Orifice Flanges Dimensions

Size in Inch	Size in mm	Outer Dia.	Flange Thick.	Hub OD	Weld Neck OD	Welding Neck Length	RF Dia.	RF Height	PCD	Orifice Hole dia	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	F	G	H	I
1	25	150	38.1	52	33.5	83	50.8	7	101.6	6.4	4	7/8	150	1	M24	5.4
1 1/2	40	180	38.1	70	48.3	89	73	7	123.8	6.4	4	1	160	1 1/8	M27	7.8
2	50	215	38.1	105	60.3	102	92.1	7	165.1	6.4	8	7/8	150	1	M24	11.5
2 1/2	65	245	41.3	124	73	105	104.8	7	190.5	6.4	8	1	165	1 1/8	M27	15.8
3	80	265	47.7	133	88.9	117	127	7	203.2	9.5	8	1 1/8	185	1 1/4	M30	22
4	100	310	54	162	114.3	124	157.2	7	241.3	12.7	8	1 1/4	205	1 3/8	M33	22
6	150	395	82.6	229	168.3	171	215.9	7	317.5	12.7	12	1 3/8	265	1 1/2	M36	70
8	200	485	92.1	292	219.1	213	269.9	7	393.7	12.7	12	1 5/8	300	1 3/4	M42	119
10	250	585	108	368	273	254	323.8	7	482.6	12.7	12	1 7/8	345	1	M48	204
12	300	675	123.9	451	323.8	283	381	7	571.5	12.7	16	2	380	2 1/8	M52	303
14	350	750	133.4	495	355.6	298	412.8	7	635	12.7	16	2 1/4	415	2 3/8	M56	400
16	400	825	146.1	552	406.4	311	469.9	7	704.8	12.7	16	2 1/2	450	2 5/8	M64	510
18	450	915	162	597	457.2	327	533.4	7	774.7	12.7	16	2 3/4	500	2 7/8	M72	738
20	500	985	177.8	641	508	356	584.2	7	831.8	12.7	16	3	545	3 1/8	M76	932
24	600	1170	203.2	762	609.6	406	692.2	7	990.6	12.7	16	3 1/2	620	3 5/8	M90	1511

Class 2500 Orifice Flanges Dimensions

Size in Inch	Size in mm	Outer Dia.	Flange Thick.	Hub OD	Weld Neck OD	Welding Neck Length	RF Dia.	RF Height	PCD	Orifice Hole dia	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	F	G	H	I
1	25	160	38.1	57	33.5	92	50.8	7	108	6.4	4	7/8	150	1	M24	6.5
1 1/2	40	205	44.5	79	48.3	111	73	7	146	6.4	4	1 1/8	180	1 1/4	M30	13
2	50	235	50.8	95	60.3	127	92.1	7	171.4	6.4	8	1	185	1 1/8	M27	19
2 1/2	65	265	57.2	114	73	143	104.8	7	196.8	6.4	8	1 1/8	205	1 1/4	M30	24
3	80	305	66.7	133	88.9	168	127	7	228.6	9.5	8	1 1/4	230	1 3/8	M33	43
4	100	355	76.2	165	114.3	190	157.2	7	273	12.7	8	1 1/2	260	1 5/8	M39	66
6	150	485	108	235	168.3	273	215.9	7	368.3	12.7	8	2	350	2 1/8	M52	172
8	200	550	127	305	219.1	318	269.9	7	438.2	12.7	12	2	385	2 1/8	M52	261
10	250	675	165.1	375	273	419	323.8	7	539.8	12.7	12	2 1/2	490	2 5/8	M64	485
12	300	760	184.2	441	323.8	464	381	7	619.1	12.7	12	2 3/4	540	2 7/8	M72	730

Weight Chart

Orifice Flanges Class 150

Orifice Flanges Class 300

Orifice Flanges Class 1500

ASTM Specification of Orifice Flanges

Carbon Steel Orifice Flange

A105 Orifice Flange
Alloy Steel High-Temp Orifice Flange
A182 Gr F1 Orifice Flange
A182 Gr F11 Orifice Flange
A182 Gr F12 Orifice Flange
A182 Gr F22 Orifice Flange
A182 Gr F5 Orifice Flange
A182 Gr F9 Orifice Flange

 Alloy Steel Low-Temp Orifice Flange

A350 Gr LF2 Orifice Flange
A350 Gr LF3 Orifice Flange

 Austenitic Stainless Steel Orifice Flange

A182 Gr F304 Orifice Flange
A182 Gr F316 Orifice Flange
A182 Gr F321 Orifice Flange
A182 Gr F347 Orifice Flange
A182 Gr F304L Orifice Flange
A182 Gr F316L Orifice Flange
A182 Gr F317 Orifice Flange
A182 Gr F317L Orifice Flange
A182 Gr F321 Orifice Flange
A182 Gr F310 Orifice Flange
A182 Gr 347 Orifice Flange

 Nickel Alloy Orifice Flange

ASTM B564 Orifice Flange
astm b564 uns n06600 Orifice Flange
astm b564 uns n06625 Orifice Flange
astm b564 uns no4400 Orifice Flange
astm b564 uns n08810 Orifice Flange
astm b564 uns n08811 Orifice Flange
astm b564 uns n08825 Orifice Flange
astm b564 uns n04400 Orifice Flange
astm b564 uns n10276 Orifice Flange
astm b564 uns n10665 Orifice Flange

 Titanium Orifice Flange

astm b381 grade f2 Orifice Flange
astm b381 f5 Orifice Flange
astm b381 f3 Orifice Flange
astm b381 f12 Orifice Flange
astm b381 f7 Orifice Flange
Other grades: ASTM B381 F1, F2, F2H, F3, F4, F5, F6, F7, F7H, F9, F10, F11, F12, F13, F14, F15, F16, F16H, F17, F18, F19, F20, F21, F23, F24, F25, F26 , F26H, F27, F28, F29, F30, F31, F32, F33, F34, F35, F36, F37, F38 Orifice Flange.

Type of Orifice Flanges we produce:

Orifice Class 150 Flange	Orifice Threaded Flange
Orifice Class 300 Flange	Orifice With 1/2 Npt Flange
Orifice Class 1500 Flange	Orifice With Threaded Hole Flange
Orifice Class 600 Flange	Orifice Weight 150# Flange
Orifice Class 900 Flange	Orifice Rtj 1500 Flange
Orifice Class 2500 Flange	Orifice Ring Type Joint Flange
Orifice Pn16 Flange	Orifice Flat Face Flange
Orifice Pn10 Flange	Orifice Slip On Flange
Orifice Pn40 Flange	Orifice Rtj 900 Flange
Orifice Pn 160 Flange	Orifice Rtj Flange
Orifice Pn 64 Flange	Orifice Npt Flange
Orifice Dn150 Pn16 Flange	Orifice Jis 5k Flange
Orifice Din 2527 Flange	Orifice Jis B2220 Flange
Orifice Din En 1092-1 Flange	Orifice Jis 10k Flange
Orifice Din 2633 Flange	Kf Orifice Flange
Orifice Din 2576 Flange	Orifice B16.47 Flange
Orifice Asme B16.5 Class 300 Flange	Orifice Ansi B16.5 150 Flange

Supplying Orifice Flanges to our worldwide clients

JK Engineering Works is a Govt. approved certified Industrial Carbon Steel Orifice Flanges Exporter in India. All of our Stainless Steel Orifice Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc.

Stock an extensive range of Stainless Steel Orifice Flanges, Carbon Steel Orifice Flanges Wholesaler in Mumbai, India & Give you best Industrial Orifice Flanges Prices in Mumbai.

JK Engineering Works Orifice Flanges Manufacturer Stainless Steel Orifice Flanges Industrial Carbon Steel Orifice Flanges Exporter in India Orifice Flanges Wholesaler in Mumbai Industrial Orifice Flanges Prices in Mumbai Opening Flanges Manufacturer Stainless Steel Opening Flanges Industrial Opening Flanges Exporter in Mumbai Opening Flanges Wholesaler in Mumbai Industrial Opening Flanges Prices in Mumbai Jk Flanges Ms Flanges Manufacturer in 2023 Best Ms Flanges Manufacturer in Mumbai Industrial Ms Flange Manufacturer in Mumbai JK Flanges Manufacturer JK Flanges Manufacturer Ms Flange Exporter in India Flange Wholesaler in Mumbai Best Ms Flanges Manufacturer Industrial Flanges Products Manufacturer leading manufacturer of Ms Flanges High Quality Ms Flanges Wholesaler in Mumbai Industrial Flanges Products Manufacturer Best Flanges Exporter in india Ms Flanges Manufacturer Cs Flanges Manufacturer Ss Flanges Manufacturer Best Opening Flanges Manufacturer Stainless Steel Opening Flanges Industrial Opening Flanges Exporter in Mumbai

Opening Flanges Wholesaler in Mumbai Industrial Opening Flanges Prices in Mumbai Best Spade Flanges Manufacturer Best Industrial Stainless Steel Spade Flanges Industrial Spade Flanges Exporter in Mumbai Carbon Steel Spade Flanges Wholesaler in Mumbai Industrial Spade Flanges Prices in Mumbai Best Non Standard Flanges Manufacturer Best Stainless Steel Non Standard Flanges Carbon Steel Non Standard Flanges exporter in India Non Standard Flanges Wholesaler in Mumbai Industrial Non Standard Flanges Prices in Mumbai Best Ring Spacer Flanges Manufacturer Best Alloy Steel Ring Spacer Flanges Manufacturer Industrial Ring Spacer Flanges Exporter in India Carbon Steel Ring Spacer Flanges Wholesaler in Mumbai

Industrial Ring Spacer Flanges Prices in Mumbai Best Male Female Flanges Manufacturer Best Stainless Steel Male Female Flanges Industrial Carbon Steel Male Female Flanges Exporter in India Best Male Female Flanges Wholesaler in Mumbai Industrial Male Female Flanges Prices in Mumbai Best Raised Face Flanges Manufacturer Best Industrial Stainless Steel Raised Face Flanges Industrial Carbon Steel Raised Face Flanges Exporter in India Raised Face Flanges Wholesaler in Mumbai Industrial Raised Face Flanges Prices in Mumbai Best Bleed Ring Flanges Manufacturer Best Stainless Steel Bleed Ring Flanges

Industrial Carbon Steel Bleed Ring Flanges Exporter in India Bleed Ring Flanges Wholesaler in Mumbai Best Industrial Bleed Ring Flanges Prices in Mumbai Lap Joint Flanges Manufacturer in 2023 Best Industrial Stainless Steel Lap Joint Flanges Industrial Carbon Steel Lap Joint Flanges Exporter in India Lap Joint Flanges Wholesaler in Mumbai Industrial Lap Joint Flanges Prices in Mumbai Loose Flanges Manufacturer Best Stainless Steel Loose Flanges Best Industrial Carbon Steel Loose Flanges Exporter in India Loose Flanges Wholesaler in Mumbai Industrial Loose Flanges Prices in Mumbai Best RTJ Flanges Manufacturer

Best Ring type joint Flanges Manufacturer Industrial Carbon Steel RTJ Flanges Exporter in India RTJ Flanges Wholesaler in Mumbai Industrial RTJ Flanges Prices in Mumbai Best Flat Flanges Manufacturer Best Stainless Steel Flat Face Flanges Industrial Carbon Steel Flat Flanges Exporter in India Flat Flanges Wholesaler in Mumbai Industrial Flat Flanges Prices in Mumbai Tongue and Groove Flanges Manufacturer Stainless Steel Tongue and Groove Flanges Industrial Carbon Steel Tongue and Groove Flanges Exporter in India Tongue and Groove Flanges Wholesaler in Mumbai Industrial Tongue and Groove Flanges Prices in Mumbai

Best High Hub Flanges Manufacturer Best Industrial Stainless Steel High Hub Flanges Best Industrial Carbon Steel High Hub Flanges Exporter in India Best High Hub Flanges Wholesaler in Mumbai Industrial High Hub Flanges Prices in Mumbai Best Industrial Flanges Manufacturer Stainless Steel Expander Flanges Industrial Carbon Steel Expander Flanges Exporter in India Best Expander Flanges Wholesaler in Mumbai Best Industrial Expander Flanges Prices in Mumbai Best Welding Neck Flanges Manufacturer Stainless Steel Welding Neck Flanges Industrial Carbon Steel Welding Neck Flanges Exporter in India Welding Neck Flanges Wholesaler in Mumbai

Industrial Welding Neck Flanges Prices in Mumbai Best Industrial Socket weld Flanges Manufacturer Stainless Steel Socket weld Flanges Industrial Carbon Steel Socket weld Flanges Exporter in India Socket weld Flanges Wholesaler in Mumbai Industrial Socket weld Flanges Prices in Mumbai Best Industrial Blind Flanges Manufacturer Stainless Steel Blind Flanges Industrial Carbon Steel Blind Flanges Exporter in India Blind Flanges Wholesaler in Mumbai Industrial Blind Flanges Prices in Mumbai Best Industrial Orifice Flanges Manufacturer

Best Industrial Stainless Steel Orifice Flanges Industrial Carbon Steel Orifice Flanges Exporter in India Orifice Flanges Wholesaler in Mumbai Industrial Orifice Flanges Prices in Mumbai Slip on Flanges Manufacturer Stainless Steel Slip on Flanges Industrial Carbon Steel Slip on Flanges Exporter in India Slip on Flanges Wholesaler in Mumbai Industrial Slip on Flanges Prices in Mumbai Best Industrial Threaded Flanges Manufacturer Stainless Steel Threaded Flanges Industrial Carbon Steel Threaded Flanges Exporter in India Threaded Flanges Wholesaler in Mumbai

Industrial Threaded Flanges Prices in Mumbai Best Plate Flanges Manufacturer Stainless Steel Plate Flanges Industrial Carbon Steel Plate Flanges Exporter in India Plate Flanges Wholesaler in Mumbai Industrial Plate Flanges Prices in Mumbai Best Forged Steel Flanges Manufacturer Stainless Forged Steel Flanges Best Industrial Carbon Forged Steel Flanges Exporter in India Best Industrial Forged Steel Flanges Wholesaler in Mumbai Industrial Forged Steel Flanges Prices in Mumbai Best Industrial Spectacle Blind Flanges Manufacturer Best Industrial Stainless Steel Spectacle Blind Flanges

Industrial Carbon Steel Spectacle Blind Flanges Exporter in India Spectacle Blind Flanges Wholesaler in Mumbai Best Industrial Spectacle Blind Flanges Prices in Mumbai

SORF FLANGES MANUFACTURER WNRF FLANGES MANUFACTURER BLRF FLANGES MANUFACTURER FLANGES MANUFACTURER FORGING FLANGES MANUFACTURER MS FLANGES FORGED FLANGES MANUFACTURER WNRTJ FLANGES MANUFACTURER FLANGES STOCKIST STANDARD FLANGES ASME B16.5 Flanges A105 Flanges IS 2062 Flanges

ENGINEERING WORKS

Orifice Flanges

Orifice Flanges Manufacturer

Orifice Flanges Specification

Orifice Flanges Material

Prestige quality Industrial Carbon Steel Orifice Flanges Exporter in India offer these Carbon Steel Orifice Flanges in DIN, EN, BS, ISO, JIS or ANSI standard.

Orifice Flanges Dimensions

Class 600 Orifice Flanges Dimensions

Class 900 Orifice Flanges Dimensions

Class 1500 Orifice Flanges Dimensions

Class 2500 Orifice Flanges Dimensions

Weight Chart

Orifice Flanges Class 150

Orifice Flanges Class 300

Orifice Flanges Class 300

Orifice Flanges Class 1500

ASTM Specification of Orifice Flanges

Type of Orifice Flanges we produce:

Supplying Orifice Flanges to our worldwide clients

JK Engineering Works is a Govt. approved certified Industrial Carbon Steel Orifice Flanges Exporter in India. All of our Stainless Steel Orifice Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc.

Stock an extensive range of Stainless Steel Orifice Flanges, Carbon Steel Orifice Flanges Wholesaler in Mumbai, India & Give you best Industrial Orifice Flanges Prices in Mumbai.

Industrial Carbon Steel Spectacle Blind Flanges Exporter in India Spectacle Blind Flanges Wholesaler in Mumbai Best Industrial Spectacle Blind Flanges Prices in Mumbai

SORF FLANGES MANUFACTURER WNRF FLANGES MANUFACTURER BLRF FLANGES MANUFACTURER FLANGES MANUFACTURER FORGING FLANGES MANUFACTURER MS FLANGES FORGED FLANGES MANUFACTURER WNRTJ FLANGES MANUFACTURER FLANGES STOCKIST STANDARD FLANGES ASME B16.5 Flanges A105 Flanges IS 2062 Flanges

Quick Links

Our Products

Contact Details